User Mng. Screen - Panasonic AW-HE130W Operating Instructions Manual

Web screen configurations (continued)
Camera title
Input the camera title here. The camera title which has been input is
displayed on the multi screen.
Maximum 0 to 20 half-size characters
number of
characters
Invalid Symbols
characters
Factory settings:
Cam 1: The product number appears.
Cam 2 to Cam 16: blank
<NOTE>
• When a 16-screen multi screen is selected, camera titles may be
only partially displayed.
• Multi screen displays are displayed in 4:3 aspect ratio.

User mng. screen

The users and computers (IP addresses) that can access the unit from
computers and mobile terminals are registered in the User mng. screen.
The User mng. screen consists of three tabs, "User auth.", "Host auth."
and "Priority Stream".
User auth. screen
„
Click the User auth. tab of User mng. screen. (→page @@, page @@)
Configure the user authorization settings for the computers and mobile
terminals that can access the unit.
Up to 24 users can be registered.
<NOTE>
• If user authentication fails more than 8 times within a 30-second
period from the same IP address (computer), access to the unit will be
disabled for a certain period.
User auth.
User authorization is set to "On" or "Off" here.
Setting value:
On Perform user authentication.
Off Do not perform user authentication.
Factory settings:Off
Authentication [Digest or Basic, Digest, Basic]
Specify the method of user authentication to use.
Use digest authentication or basic authentication.
Setting value:
Digest or Basic Use digest authentication or basic authentication.
Digest Use digest authentication.
Basic Use basic authentication.
Factory settings: Digest or Basic
<NOTE>
• If you change the [Authentication] setting, close the browser and
perform access again.
User name
Input the user name.
Maximum 1 to 32 half-size characters
number of
characters
Invalid " & : ; ¥
characters
Factory settings: blank
87