Introduction; Notational Conventions - Siemens D1107 Additional Technical Manual

Introduction

This system board is available in different configuration levels. Depending on the
i
hardware configuration of your device, it may be that you cannot find several options in
your version of the system board, even though they are described.
You may find further information e. g. in the complete Technical Manual for the system board and in
the description "BIOS Setup". For detailed information see chapter "Documentation".
Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers &
Utility" or "ServerStart" CD. For detailed information please look at chapter
latest BIOS version or drivers can be found on the internet under
http://www.siemens.de/computer/service.

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:
Pay particular attention to texts marked with this symbol. Failure to observe this warning
!
endangers your life, destroys the system, or may lead to loss of data.
Supplementary information, remarks and tips follow this symbol.
i


Texts which follow this symbol describe activities that must be performed in the order shown.


This symbol means that you must enter a blank space at this point.



This symbol means that you must press the Enter key.
Texts in this typeface are screen outputs.
Texts in this bold typeface are the entries you make via the keyboard.
Texts in italics indicate commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being emphasized.
A26361-D1107-Z180-6-7619
"Installing drivers". The
English - 1