D-Link DCS-7000L User Manual page 41

Section 4: Configuration
Preset List:
To add a preset to the sequence, select it from the drop-down box
at the bottom of this window, set the Dwell time to determine
how long the camera view will stay at that preset, then click the
Add button. The preset name will appear in the list, followed by
the dwell time to view that preset for.
You can rearrange your presets in the sequence by selecting a
preset in the sequence, then clicking the arrow buttons to move
it higher or lower in the current sequence.
Clicking the trash can button will remove the currently selected
preset from the sequence.
If you want to change the dwell time for a preset, select it from
the list, enter a new dwell time, then click the Update button.
D-Link DCS-7000L User Manual 41