Network Setup - D-Link DCS-7000L User Manual

Section 4: Configuration
Use this section to configure the network connections for your camera. All
relevant information must be entered accurately. After making any changes, click
the Save Settings button to save your changes.
DHCP: Select this connection if you have a DHCP server running on
your network and would like your camera to obtain an IP address
automatically.
Static IP You may obtain a static or fixed IP address and other network
Address: information from your network administrator for your camera.
IP Address: Enter the fixed IP address in this field.
Subnet Mask: This number is used to determine if the destination is in the same
subnet. The default value is 255.255.255.0.
Default Gateway: The gateway used to forward data to.
Primary DNS: The primary domain name server translates names to IP
addresses.
Secondary DNS: The secondary DNS acts as a backup to the primary.
Enable UPnP Enabling this setting allows your camera to be configured as a
Presentation: UPnP device on your network.
Enable UPnP Enabling this setting allows the camera to specify a port to
Port Forwarding: forward for remote UPnP connections.
Enter the UPnP port you wish to forward, and click Test to check
Forwarding
Port: whether it is available.
Forwarding Displays the current UPnP port forwarding status.
Status:
D-Link DCS-7000L User Manual

Network Setup

31