Network Setup - D-Link DCS-5010L User Manual

Section 4 - Configuration
This section allows you to configure your network settings.
DHCP: Select DHCP if you have a DHCP server running on your network
and would like a dynamic IP address to be assigned to your camera
automatically.
Static IP
Select this connection type if your Internet Service Provider (ISP)
Address:
or network administrator has provided you with a static or fixed IP
address and other network information for your camera.
IP Address: Enter the fixed IP Address for your camera.
Subnet Mask: Enter the Subnet Mask for your network. This value
is used to determine if the destination is the same subnet as host
devices. (The default value is 255.255.255.0.)
Default Gateway: Enter the address for the gateway used to forward
data to destinations in a different subnet. Invalid gateway settings
may cause the failure of transmissions.
Primary DNS: Enter the IP address for the primary domain name server
that translates names to IP addresses.
Secondary DNS: Enter the IP address for the secondary domain name
server to backup the Primary DNS.
PPPoE
If your camera is directly connected to the Internet through a DSL
modem, you may connect to the Internet using PPPoE. Click PPPoE
and enter the User ID and Password provided to you by your ISP or
network administrator.
Port Settings:
You may configure a second HTTP port that will allow you to connect
to the camera using a standard Web browser. The port can be set to a
number other than the default TCP port of 80. A corresponding port
must be opened on the router. For example, if the port is changed
to 1010, users must type http://192.168.0.100:1010 instead of only
http://192.168.0.100.
UPnP Settings:
Enable this setting to configure your camera as a UPnP (Universal Plug
and Play) device in the network.
UPnP Port
If you enable UPnP port forwarding, it will allow the camera to
Forwarding:
communicate with a UPnP compatible network router for simplified
local network access and remote access using the Internet.
D-Link DCS-5010L User Manual

Network Setup

30 30