D-Link DCS-5010L User Manual page 39

Section 4 - Configuration
Enable the
Check the box to enable the e-mailing of snapshots. The camera will
emailing of
send images to your e-mail account as specified below:
images to an
email account: • Click Always to have snapshots e-mailed continuously based on
the specified E-mail Interval.
• Click Schedule to set a schedule for starting and stopping the
e-mailing of snapshots.
• Select Motion Detection if you would like to receive e-mail with
images only when motion is detected. You can choose whether to
e-mail a snapshot immediately, or e-mail six snapshots together,
with three frames before and after motion was detected. You can
also set the Frame interval time to specify how far apart the
snapshots should be (in seconds).
E-mail Interval:
This number determines how frequently e-mail notifications will be
sent. Specify a number, in seconds, representing the period of time
between snapshot e-mails. This value can be set from 1 to 65535
seconds.
Enable the
Check the box to enable the e-mailing of video clips. This is similar
emailing of
to e-mailing images, as specified above. The camera will send video
video clips clips within the Video Limit settings that you specify. Select a Size in
to an email
KBytes and a Time in seconds.
account:
Test E-mail Click Test to send a test e-mail according to the e-mail settings you
Account:
specified above.
Click Save Settings.
D-Link DCS-5010L User Manual 39 39