System - D-Link DCS-5010L User Manual

Section 4 - Configuration
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local Click Save Configuration to save the current camera configuration
Hard Drive:
to your local PC.
Load From To load a previously saved configuration, click Browse... and select
Local Hard your saved configuration file. Then click Restore Configuration From
Drive: File to load the file from the local hard drive.
Restore Click Restore Factory Defaults to reset all settings back to the factory
To Factory
defaults. Please note that this will erase any changes you have made
Default:
to the settings of the camera.
Reboot The Click Reboot the Device to reboot the camera.
Device:
D-Link DCS-5010L User Manual

System

46 46