Motion Detection - D-Link DCS-7000L User Manual

Section 4: Configuration
Enabling Video Motion will allow your camera to use the motion detection feature.
You may define a motion area that will be used for monitoring. After making any
changes, click the Save Settings button to save your changes.
Enable Video Select this box to enable the motion detection feature of your
Motion: camera.
Sensitivity: Specifies the measurable difference between two sequential
images that would indicate motion. Please enter a value between
0 and 100.
Percentage: Specifies the amount of motion in the window being monitored
that is required to initiate an alert. If this is set to 100%, motion is
detected within the whole window will trigger a snapshot.
Draw Motion Draw the motion detection area by dragging your mouse in the
Area: window (indicated by the red square).
Erase Motion To erase a motion detection area, simply click on the red square
Area: that you wish to remove.
Right clicking on the camera image brings up the following
menu options:
Select All: Draws a motion detection area over the entire screen.
Clear All: Clears any motion detection areas that have been
drawn.
Restore: Restores the previously specified motion detection
areas.
D-Link DCS-7000L User Manual

Motion Detection

42