Table of Contents
Advertisement
5.
Set IP Address Utility
This program is for the network IP setting using the MAC address which is the hardware serial number of the
network printer card or interface. Especially, it is for the network administrator to set several network IPs at
the same time.
NOTE:
You can only use Set IP Address Utility when your printer is connected to a network.
1.
Connect the network cable to your machine.
2.
Print the Network Configuration page of the printer to see the current network configuration and MAC
address.
3.
From the Start menu, select Programs
Utility .
4.
Click in the SetIP window to open the TCP/IP configuration window.
5.
Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply
.
NOTE:
when you enter the MAC address, enter it without colon(:).
6.
Click OK .
7.
Click Exit to close the SetIP program.
Downloaded from ManualsPrinter.com Manuals
Dell Printers
Dell 2335dn MFP
Set IP Address
Advertisement
Table of Contents
Troubleshooting
