5.
Click OK .
If this is a new printer, you may be prompted to install a printer driver. If no system driver is
available, then you will need to provide a path to available drivers
6.
Select whether you want this printer to be the default printer for the client, and then click Finish .
7.
Print a test page to verify printer installation.
When a test page prints successfully, printer installation is complete.
To print a test page:
1.
For Windows 2000, click the Start button
For Windows XP/Server 2003, click the Start button and point to Printers and Faxes .
For Windows Vista/Server 2008, click the Start button and click Control Panel
Sound
Printers .
For Windows 7, click the Start button and click Control Panel
and Printers .
For Windows Server 2008 R2, click the Start button and click Control Panel
Devices and Printers .
2.
Double-click your printer icon.
3.
Click the File menu and point to Properties .
4.
Click the General tab, and select Print Test Page .
Setting Up a Network-connected Printer
You must set up the network protocols on the printer to use it as your network printer. Protocols can be set
up by the following two methods:
1 Via Network Administration Programs
You can configure your printer's print server settings and manage it via the following programs:
Set IP Address Utility : A utility program allowing you to find your network printer and manually
configure the addresses for use with the TCP/IP protocol.
Embedded Web Service : A web server embedded to your network print server, which allows you to:
Configure the network parameters necessary for the printer to connect to various network
environments.
2 Via the Operator Panel
Downloaded from ManualsPrinter.com Manuals
Settings
Printer .
Hardware and Sound
Hardware and
Devices
Hardware