1. Manuals
  2. Brands
  3. LG Manuals
  4. LED TV
  5. UB85 Series
  6. Owner's manual

LG UB85 series Owner's Manual

Ub85, uc97, ub95, ub93, uc9, ub98, ug88 series led tvs are lcd tvs with led backlighting
Hide thumbs Also See for UB85 series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
OWNER'S MANUAL
LED TV*
LG LED TVs are LCD TVs with
*
LED backlighting.
Please read this manual carefully before operating your set
and retain it for future reference.
UB85**
UB98**
UB93**
UC97**
UB95**
UC9*
*MFL68066606*
UG88**
P/NO : MFL68066606 (1411-REV05)
Click! User Guide
www.lg.com
Printed in Korea

Advertisement

Table of Contents
loading

Related Manuals for LG UB85 series

Summary of Contents for LG UB85 series

  • Page 1 OWNER’S MANUAL LED TV* LG LED TVs are LCD TVs with LED backlighting. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. UB85** UB98** UG88** UB93** UC97** UB95** UC9* www.lg.com *MFL68066606*...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS LICENSES Audio Connection - Digital optical audio Connection Headphone Connection OPEN SOURCE SOFTWARE USB Connection NOTICE CI module Connection Euro Scart Connection EXTERNAL CONTROL DEVICE SETUP REMOTE CONTROL SAFETY INSTRUCTIONS MAGIC REMOTE FUNCTIONS Viewing 3D Imaging (Only 3D models) Registering Magic Remote How to use Magic Remote INSTALLATION PROCEDURE...

  • Page 3: Licenses

    In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.

  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING y Do not place the TV and/or remote control in the following environments: - A location exposed to direct sunlight - An area with high humidity such as a bathroom - Near any heat source such as stoves and other devices that produce heat - Near kitchen counters or humidifiers where they can easily be exposed to steam or - An area exposed to rain or wind...
  • Page 5 SAFETY INSTRUCTIONS y Bend antenna cable between inside and outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock. y When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock/fire hazard.
  • Page 6 SAFETY INSTRUCTIONS y Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur. y Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
  • Page 7 SAFETY INSTRUCTIONS CAUTION y Install the product where no radio wave occurs. y There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. y Do not install the product on places such as unstable shelves or inclined surfaces.
  • Page 8 SAFETY INSTRUCTIONS y Make sure there are no objects between the remote control and its sensor. y Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. y When connecting external devices such as video game consoles, make sure the connecting cables are long enough.
  • Page 9 SAFETY INSTRUCTIONS y Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen. y When cleaning the product and its components, unplug the power first and wipe it with a soft cloth.
  • Page 10 SAFETY INSTRUCTIONS y You may find different brightness and colour of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. y Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking.

  • Page 11: Viewing 3D Imaging (Only 3D Models)

    SAFETY INSTRUCTIONS Viewing 3D Imaging (Only 3D models) WARNING Viewing Environment y Viewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness y Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
  • Page 12 Cautions when using the 3D glasses y Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. y Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

  • Page 13: Installation Procedure

    INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. y New features may be added to this TV in the future.
  • Page 14 ASSEMBLING AND PREPARING NOTE How to use the ferrite core (Depending on model) y Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV. [Cross Section of Ferrite Core] (Dep [to the TV]...
  • Page 15 ASSEMBLING AND PREPARING ENERGY AV MODE INPUT SAVING FLASHBK LIST MARK MUTE MENU INFO Q.MENU Tag On ENTER BACK EXIT L/R SELECT FREEZE RATIO Remote Control, Magic remote, batter- Owner’s manual Tag on Batteries (AAA) ies (AA) (Depending on model) (Depending on model) (Only UB85**, UB93**, The remote control will...
  • Page 16 ASSEMBLING AND PREPARING Stand Body / Stand Stand Body / Stand Stand Screws Stand Screws AV P Base Base 8EA, M4 x L20 4EA, M4 x L10 (Onl (Only UC97**) (Only UG88**) (Only UB85**-ZA, (Only UB85**-ZD, (See (See p. 27, 28) (See p.

  • Page 17: Separate Purchase

    Contact your dealer for buying these items. These devices only work with certain models. AG-F***DP AG-F*** AN-MR500 AN-VC5** Dual play glasses Cinema 3D glasses Magic Remote Video call camera LG Audio Device Tag on UB85**, UB95**, Compatibility UB93** UB98**, UC9* UC97**, UG88** AG-F***DP • •...

  • Page 18: Parts And Buttons

    Joystick Button Power Indicator Power Indicator C type : UB93**, UB95**-ZA D type : UB95**-ZB Screen Screen Speakers Speakers Remote control and Remote control and Intelligent sensors Intelligent sensors Joystick Button Joystick Button LG Logo light LG Logo light...
  • Page 19 Speakers Remote control and Remote control and Intelligent sensors Intelligent sensors Joystick Button Joystick Button LG Logo light LG Logo light G type : 98UB98** H type : UC97** Built-in camera Screen Screen Speakers Remote control and Remote control and...
  • Page 20 2 Joystick Button - This button is located behind the TV screen. 3 Joystick Button - This button is located below the TV screen. NOTE y You can set the LG Logo Light or power indicator light to on or off by selecting General in the main menus. (Depending on model)

  • Page 21: Using The Joystick Button

    ASSEMBLING AND PREPARING Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic Functions When the TV is turned off, place your finger on the joystick button and Power On press it once and release it.

  • Page 22: Lifting And Moving The Tv

    ASSEMBLING AND PREPARING Lifting and moving the TV y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the TV as Please note the following advice to prevent the TV from shown in the following illustration.

  • Page 23: Setting Up The Tv

    ASSEMBLING AND PREPARING Setting up the TV Image shown may differ from your TV. Attaching the stand UB85**-ZA, UB93**, UB95**-ZA Stand Body (L) Stand Body (R) Stand Base 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV.
  • Page 24 ASSEMBLING AND PREPARING UB85**-ZD, UB95**-ZB Stand Body (R) Stand Body (L) Stand Base 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV.
  • Page 25 ASSEMBLING AND PREPARING 65/79/84UB98** (Only 65/79UB98**) Wrench Stand Base M6 x L47 (Only 65UB98**) M6 x L52 (Only 79UB98**) (Only 84UB98**) Wrench M6 x L52 (Insulation Holder)
  • Page 26 ASSEMBLING AND PREPARING 98UB98** CAUTION y Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after Wrench being installed.) Mold M6 x L47 NOTE y The stand screws are already attached at the back of the TV.
  • Page 27 ASSEMBLING AND PREPARING UC97** Stand Body (L) Stand Body (R) Stand Base Stand Base M4 x L10 Wrench 1 When assembling the stand, lay the front screen protective package included in the product box on a table or flat surface and then place the TV screen face down on the protective package.
  • Page 28 ASSEMBLING AND PREPARING M4 x L20 * Use at least two people to attach the stand to the TV. 1 When assembling the stand, lay the front screen protective package included in the product box on a table or flat surface and then place the TV screen face down on the protective package.

  • Page 29: Mounting On A Table

    ASSEMBLING AND PREPARING Mounting on a table CAUTION 1 Lift and tilt the TV into its upright position on a table. y When attaching the stand to the TV set, place - Leave a 10 cm (minimum) space from the wall the screen facing down on a cushioned table or for proper ventilation.

  • Page 30: Mounting On A Wall

    LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please (Only 98UB98**) (Only 105UC9*) use a wall mount bracket where the device is ad- equately secured to the wall with enough space to allow connectivity to external devices.
  • Page 31 TV, insert the wall mount inner spacers into the TV wall mount holes to move your TV in vertical angle. Please make sure not to use the spacers for LG wall mounting bracket. CAUTION (Only UC97**, UG88**)

  • Page 32: Tidying Cables

    ASSEMBLING AND PREPARING Tidying cables (Only UC97**) Image shown may differ from your TV. 1 Gather and bind the cables with the Cable Holder and the Cable Management. 2 Fix the Cable Management firmly to the TV. (Only UB85**-ZA, UB93**, UB95**-ZA) Cable Holder Cable Management Cable Holder...
  • Page 33 ASSEMBLING AND PREPARING 1 Gather and bind the cables with the Cable Holder. 1 Fix the Cable Management firmly to the TV. (Only UC9*) (Only 65/79/84UB98**) Cable Holder Cable Management CAUTION y Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur.

  • Page 34: Assembling The Av Cover

    ASSEMBLING AND PREPARING Assembling the AV cover (Only UC9*) 1 Insert the cover holder attached to the AV port cover (Only 98UB98**) into the hole of the main body of the product as illustrated. 1 Insert the cover holder attached to the AV port cover 2 Attach the AV port cover by inserting it into the into the hole of the main body of the product as left hole of the port.

  • Page 35: Sliding Speaker

    ASSEMBLING AND PREPARING Sliding Speaker CAUTION y When the Sliding Speaker is operating (when (Only 98UB98**) the TV is turned on/off), ensure that children do not put their hands near the operating part of the speaker (at the bottom of the TV) and that they do not crawl into the space below the TV.

  • Page 36: Using Built-In Camera

    ASSEMBLING AND PREPARING Using Built-in Camera Preparing Built-in Camera (This feature is not available for all models.) (Only UB98**, UC9*) 1 Pull up the slide at the back of the TV. You can make a Skype video call or use the motion recognition function using the built-in camera of the TV.

  • Page 37: Name Of Parts Of Built-In Camera

    MAKING CONNECTIONS MAKING CONNECTIONS 3 Push down the built-in camera when you are not using it. This section on MAKING CONNECTIONS mainly uses diagrams for the UB85** models. Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.

  • Page 38: Antenna Connection

    MAKING CONNECTIONS Antenna Connection Satellite dish Connection (Only satellite models) 13 / 18 V 700mA Max LNB IN Satellite ANTENNA / CABLE (*Not Provided) (*Not Provided) Wall Antenna Socket Satellite Dish Connect the TV to a wall antenna socket with an RF cable (75 Ω).

  • Page 39: Hdmi Connection

    MAKING CONNECTIONS HDMI Connection 1) HDMI specifications may be different for each input port, so make sure to check the device specifications before connecting. 2) The HDMI IN 3 port is especially suitable for the specifications to enjoy UHD Video (4:4:4, 4:2:2) of 4K @ 50/60 Hz.

  • Page 40: Dvi To Hdmi Connection

    MAKING CONNECTIONS DVI to HDMI Connection Component Connection COMPONENT VIDEO AUDIO YELLOW GREEN (Use the composite (Use the component gender cable provided.) gender cable provided.) (*Not Provided) (*Not Provided) (*Not Provided) AUDIO OUT DVI OUT DVD / Blu-Ray / HD Cable Box / PC / HD STB AUDIO VIDEO DVD / Blu-Ray...

  • Page 41: Composite Connection

    MAKING CONNECTIONS Composite Connection MHL Connection COMPONENT VIDEO AUDIO ponent provided.) YELLOW (Use the composite gender MHL passive cable cable provided.) (*Not Provided) Mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile (*Not Provided) phones to television sets.

  • Page 42: Audio Connection

    MAKING CONNECTIONS Audio Connection Headphone Connection Ext.SPEAKER OPTICAL / H/P DIGITAL (*Not Provided) AUDIO (*Not Provided) Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. NOTE y AUDIO menu items are disabled when connecting OPTICAL AUDIO IN a headphone.

  • Page 43: Usb Connection

    MAKING CONNECTIONS USB Connection CI module Connection (*Not Provided) (*Not Provided) (*Not Provided) (*Not Provided) Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the SmartShare menu to use various multimedia files.

  • Page 44: Euro Scart Connection

    MAKING CONNECTIONS Euro Scart Connection IN / OUT (RGB) (Use the Scart gender cable provided - Depending on model) (*Not Provided) Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable (or Scart gender cable) as shown.

  • Page 45: Remote Control

    REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover.
  • Page 46 REMOTE CONTROL (Depending on model) AD/PIP (POWER) Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. INPUT Changes the input source. TV / SETTINGS Accesses the main menus. Q. MENU Accesses the quick menus. INFO Views the information of the current programme and screen. Q.MENU SUBTITLE Recalls your preferred subtitle in digital mode.

  • Page 47: Magic Remote Functions

    MAGIC REMOTE FUNCTIONS MAGIC REMOTE FUNCTIONS When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.

  • Page 48: Registering Magic Remote

    MAGIC REMOTE FUNCTIONS How to use Magic Remote Voice recognition Network connection is required to use the voice recognition function. y Shake the Magic Remote slightly 1. Press the Voice recognition button. to the right and left or press 2. Speak when the voice display window appears (Home), buttons to on the left of the TV screen.

  • Page 49: Precautions To Take When Using The Magic

    MAGIC REMOTE FUNCTIONS Precautions to Take when Using the Magic Remote y Use the Magic Remote within the maximum communication distance (10 m). Using the Magic Remote beyond this distance, or with an object obstructing it, may cause a communication failure. y A communication failure may occur due to nearby devices.

  • Page 50: Using The User Guide

    USING THE USER GUIDE / MAINTENANCE USING THE USER GUIDE MAINTENANCE User Guide allows you to more easily access the detailed TV information. Cleaning your TV 1 Press the (Home) button to access the Home Clean your TV regularly to keep the best performance menu.

  • Page 51: Troubleshooting

    SPECIFICATIONS TROUBLESHOOTING Problem Solution Cannot control the TV with y Check the remote control sensor on the product and try again. the remote control. y Check if there is any obstacle between the product and the remote control. y Check if the batteries are still working and properly installed No image display and no y Check if the product is turned on.
  • Page 52 SPECIFICATIONS (Only UB98**, UC9*) Wireless LAN module (LGSWF41) specification Standard IEEE 802.11a/b/g/n/ac 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) 802.11a: 14.5 dBm 802.11b: 16 dBm Output Power 802.11g: 13.5 dBm (Max.) 802.11n - 2.4GHz: 14 dBm 802.11n - 5GHz: 15.5 dBm...
  • Page 53 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. 49UB85** MODELS 49UB850V-ZD 49UB850V-ZA 49UB856V-ZD With stand (mm) 1093 x 689 x 242 1093 x 681 x 237 Dimensions (W x H x D) Without stand (mm) 1093 x 646 x 38.2 1093 x 646 x 38.2 With stand (kg)
  • Page 54 SPECIFICATIONS 55UB95** MODELS 55UB950V-ZA 55UB950V-ZB With stand (mm) 1232 x 782 x 260 1232 x 780 x 242 Dimensions (W x H x D) Without stand (mm) 1232 x 734 x 37 1232 x 734 x 37 With stand (kg) 23.8 24.2 Weight...
  • Page 55 SPECIFICATIONS 55UC97** 65UC97** MODELS 55UC970V-ZA 65UC970V-ZA With stand (mm) 1238.7 x 757.5 x 289.0 1456.9 x 888.0 x 316.4 Dimensions (W x H x D) Without stand (mm) 1238.7 x 730 x 72.1 1456.9 x 853.2 x 71.5 With stand (kg) 27.7 34.6 Weight...
  • Page 56 Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Country Service Service 0 810 144 131 0900 543 5454 015 200 255 800 187 40 0032 15 200255...

  • Page 57: External Control

    OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...

  • Page 58: Note

    KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 59 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 60 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...

  • Page 61: Communication Parameters

    EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...

  • Page 62: Transmission / Receiving Protocol

    EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 63 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 64 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
  • Page 65 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
  • Page 66 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
  • Page 67 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
  • Page 68 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...

This manual is also suitable for:

Uc97 seriesUb95 seriesUb93 seriesUc9 seriesUb98 seriesUg88 series ... Show all

Table of Contents