Appendix I Specifications - HP t620 Troubleshooting Manual

I Specifications
Dimensions
Width: HP t620 Thin Client
Width: HP t620 PLUS Thin Client
Depth
Height (without stand)
Height (with stand)
Temperature Range (fanless design)*
Operating**
With the fiber NIC is installed
(max. rate of change is 10°C per hour or 18°F per hour)
Nonoperating
(max. rate of change is 20°C per hour or 36°F per hour)
*Specifications are at sea level with altitude derating of
1°C/300 m (1.8°F/1000 ft) to a maximum of 3 Km
(10,000 ft), with no direct, sustained sunlight. Upper limit
may be limited by the type and number of options installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28°C or 84.2°F)
Nonoperating
(max. wet bulb temperature is 38.7°C or 101.6°F)
40 mm
65 mm
240 mm
219.70 mm
220 mm
10°C to 40°C
10°C to 35°C
-30°C to 60°C
** The operating temperature range when the thin
client is attached to a flat panel using the HP Quick
Release is 10°C to 35°C (50°F to 95°F).
1.57 in.
2.56 in.
9.45 in
8.65 In
8.66 in.
50°F to 104°F
50°F to 95°F
-22°F to 140°F
10% to 90%
5% to 95%
65