Assembling The G Carriage - Brother KG-88 Service Manual

5. ASSEMBLING THE G CARRIAGE
4
-1
4
-2
• Mounting the latch stopper brush
(I) Attach the right and left screws to the latch stopper brushes.
• Mounting the arm for socket
(2) Mount the arm for socket onto the socket base, insert the stud
from the back, and fix the arm with the snap ring
rz .
(3) Attach the spring for G needle socket with screws.
• Mounting the stitch dial
( 4) -1 Mount the stitch dial lever onto the G carriage plate and fix
it with screw temporarily.
-14
Names of Parts
Latch stopper brush
Screw for latch
stopper brush (2 pes.)
(2 Arm for socket
Snap ring E 2
Stud
J
Spring for
G
needle
socket
~
-1
Stitch dialle\'Cr
4
-2Stitch dial
~
-3 RoUer, spring and cover
~ G
carriage foot
~
Arm
for needle
operation
(4) -2 Set the stitch dial to the stitch dial lever.
(4) -3 Put the roller and spring into the groove of the stitch dial
lever and set the cover.
• Mounting the G carriage foot assembly
(5) Fix the G carriage foot assembly temporarily with screws at
two positions so that it may not come inside the G carriage
plate.
• Mounting the arm for needle operation
(6) Put the arm for needle operation through the hole of the G
carriage plate.