Settings For Air Conditioner Operation - Toshiba BMS-TP5121PWE Owner's Manual

[Content of Setting Screen]
<MODE>
[FAN]
Sets operation mode to
fan only operation.
[COOL]
Sets operation mode to
cooling operation.
[HEAT]
Sets operation mode to
heating operation.
[DRY]
Sets operation mode to
dry operation.
[AUTO]
Each air conditioner
selects operation mode
automatically.
<FAN>
[LOW]
Sets low fan speed.
[MID]
Sets medium fan
speed.
[HIGH]
Sets high fan speed.
[AUTO]
Each air conditioner
selects fan speed
automatically.
A B
<ON/OFF>
[ON]
Turns on air conditioners.
[OFF]
Turns off air conditioners.
[Locked]
Turns off air conditioners
forcibly, and inhibits
operations by R/C control.
To enable operations, select
[Permitted] of R/C Ctrl.
<FLAP>
[SWING]
Swings the flap.
[NO SWING]
Stops swinging the
flap.
14

Settings for air conditioner operation

The following describes settings of operation mode,
fan speed, set temperature, R/C control, etc. Push
[SET] - [Set All Units] to open the screen shown
left. (Refer to 9 to 13 for operations to display the
setting screen.)
For blank items, the current settings of each air
conditioner are continuously valid. When
performing total setting for all units, be careful that
the displayed settings are valid for all selected air
conditioners as control settings.
[Setting]
A Set operation mode, fan speed, set temperature
and other items individually.
B Push [OK]. The settings are transmitted and the
setting screen closes. If you push [Cancel], the
setting screen closes with no settings transmitted.
<R/C Ctrl.>
[Permitted]
Enables all operations by R/C Ctrl.
[Prohibited]
Limits operations of the remote control
connected to an air conditioner.
[ON/OFF]
Inhibits ON/OFF operation by R/C Ctrl.
[MODE]
Inhibits the operation mode by R/C Ctrl.
[SET Temp.]
Inhibits changing of temperature set by R/C Ctrl.
[Cancel]
Does not execute the setting and
returns to the Monitoring screen.
<SET Temp.>
18˚C - 29˚C
Temperature is set to a
selected temperature.
[OK]
Executes the setting.
27
-EN