NEC Storage M700 Setup Manual page 11

８
Initializing the Disk Array Unit
Initialize the disk array. The initialization method differs depending on the model.
8-1
Collecting host information
To automatically collect host information on an FC model, go to 8-2.
To collect host information on an iSCSI model, go to 8-2.
Collect host information from the application server. See the following section:
"NEC Storage M700 Disk Array Unit User's Guide", 5-2 Collecting Host Information from Application Servers
8-2
Initializing and configuring the disk array
FC model
Initialize and configure the disk array from the iSM client. See the following section:
"NEC Storage M700 Disk Array Unit User's Guide", 5-3 Initialization by NEC Storage Manager
iSCSI model
Initialize the disk array from the iSM client. Configure the disk array after setting up
the iSCSI initiator for the application server. See the following section:
"NEC Storage M700 Disk Array Unit User's Guide", 6-2 Initialization by NEC Storage Manager
"NEC Storage M700 Disk Array Unit User's Guide", 6-2-2 iSCSI Setup Tool
"NEC Storage M700 Disk Array Unit User's Guide", Chapter 5, Initializing a Disk Array (FC)
"NEC Storage M700 Disk Array Unit User's Guide", Chapter 6, Initializing a Disk Array (iSCSI)