Installation - NEC Storage M700 Setup Manual

４

Installation

Perform the installation safely by reading the following safety precautions.
Mounting the disk array unit and the disk enclosure on the rack
Step 1
"NEC Storage M700 Disk Array Unit User's Guide", 3-2-1 Mounting a Disk Array unit on a Rack
"NEC Storage M700 Disk Array Unit User's Guide", 3-2-2, Mounting a Disk Enclosure on a Rack
Installing the disk drive
Step 2
Install the disk drive if it is not already mounted on the disk array unit or the disk enclosure.
"NEC Storage M700 Disk Array Unit User's Guide", 3-2-3 Installing Disk Drives
"NEC Storage M700 Disk Array Unit User's Guide", 3-2 Installation
・See the "Disk Array Unit Installation Guide".
・ The disk array unit weighs 48 kg; the disk enclosure (with a 3.5-inch disk drive), 29 kg.
・ Mounting the unit on the rack should be performed by two or more persons working together.
・ Mount the disk array enclosure and the disk array unit, top-down, in the indicated order.
・ Disk drives are electronic devices.
When handling a disk drive, take anti-static measures, such as wearing a wrist strap.
・ On each disk drive, affix a location label.
・ As system disks, install three disk drives, in locations 00, 01, and 02.
On each disk drive, affix a system disk label. Do not remove more than one drive at a time.
・ Store the removed dummy carrier in a safe place.