Periodic Maintenance Items - Canon imageRUNNER 5570 Service Manual

U.

Periodic Maintenance Items

Unit Part
Ozone filter
Air Filter 1
External
Control
Air Filter 2
Dust proofing filter
Laser Optical
Dust-proof glass
Path
Charging wire
(primary, pre-
transfer,
transfer/separation)
Charging wire
cleaner - primary,
pre-transfer,
Charging
transfer/separation
Assembly
Grid wire (primary)
Shield plate for each
corona assembly
Primary anti-stray
toner sheet
Roller electrode
Photo-sensitive Drum
Photosensitive
Drum
Electrode (for slip
ring of drum heater)
Developing cylinder
Developing Developing assembly
Assembly roll
Anti-Stray toner
Side scraper
Cleaner
Toner bottle dish
Inlet guide
Web
Fixing
Oil dish
Assembly
Thermistor unit
Sub thermistor
Separation claw
(upper and lower)
Delivery
Internal delivery roll
Assembly
External delivery roll
Waste toner
Waste toner box
collector area
Transfer guide
Register roller (upper
Pick-
and lower)
up/feeding
assembly
Feeding belt
Feeding roller
imageRUNNER 5570/6570 Service Guide
∇: lubricate
: clean : replace
Every
Upon
250,000
Installation
copies
Rev. 0
imageRUNNER 5570/6570 Service Guide
⊕: adjust
: inspect
Every Every
500,000 1,000,000
copies copies
Remove dust from surface.
After replacement, be sure to perform
wire cleaning five times in the service
mode.
Wipe with isopropyl alcohol and drum
cleaning powder (CK-0429-000)
Clean with isopropyl alcohol; 1)
electrode, 2) protruding wall of
electrode (where FY9-6008-000 is
present)
Charge collecting brush
Inspect case and remove toner.
Remarks
April 2005 Page 17