Database Transfer Utility; About The Database Transfer Utility; Connecting The Systems - NEC DS1000 Operation Manual

Database Transfer Utility

Database Transfer Utility

About the Database Transfer Utility

The Database Transfer Utility allows you to transfer the contents of one DS1000 system (called the source)
to another DS1000 system (called the destination). All programming is transferred, including user-set
options such as Personal Speed Dial, Distinctive Ringing and custom Volume/Contrast Control settings.
Software version 03.**.** databases are not compatible with any prior 02.**.** versions.

Connecting the Systems

To connect the DS1000 systems for Database Transfer (Figure 5-5):
1. Be sure both systems are turned on and operating properly.
2. Check the source system programming to be sure the configuration you are going to transfer is correct.
3. Plug one end of the special Database Transfer Cable (P/N 80228) into the RS-232 port of the destina-
tion system (i.e., the system that will receive the new programming).
4. Plug the other end of the Database Transfer Cable (P/N 80228) into the RS-232 port of the source sys-
tem (i.e., the system that currently has the programming you want to transfer.
5-6 ◆ Section 5: Maintenance Options and SMDR
Figure 5-5: Setting Up Database Transfer
DS1000 Hardware Manual