Removing An Accessible Drive - Fujitsu CELSIUS W410 Operating Manual

System expansions

Removing an accessible drive

► Open the casing (see "Opening the casing", Page 35).
1
2
► Disconnect the cables connected to the drive.
► Slide the clip in the direction of the arrow (1).
► Pull the drive out of the casing in the direction of the arrow (2).
► Remove the drive cover from the drive (1).
1
1
► Place the drive cover on the holder in the direction of the arrow (1).
► If necessary, make the required settings on the remaining hard disk drives.
► If you are not installing a new drive, reinstall the previously removed cover (optional) for the
purposes of cooling, fire protection and to prevent foreign objects from getting into the casing.
► Close the casing (see "Closing the casing", Page 36).
Fujitsu Technology Solutions 39