Projector Reset Options - Reset Menu - Epson PowerLite 525W User Manual

Event ID code
0483
04FE
0479
04FF
0891
0892
0893
0894
0898
0899
Parent topic:

Projector Reset Options - Reset Menu

You can reset most of the projector settings to their default values using the Reset All option on the
Reset menu.
Cause and solution
The EasyMP Network Projection program quit unexpectedly. Check the network
communication status, then turn the projector off and then on again.
A projector system error has occurred. Turn the projector off and then on again.
Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
The WEP/TKIP/AES encryption type does not match. Make sure the wireless
network security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the DHCP setting in the Network menus.
A communication error has occurred. Try restarting the EasyMP Network Projection
program and restarting your projector. If that does not solve the problem, contact
Epson for help.
Projector Information Display - Info Menu
126