Changing TV channels with your HD DVR Remote Control
After you have successfully performed the remote control programming on page 12 you will
be able to operate your HD DVR with your HD DVR remote control. Refer to "Using your
DVR Remote Control with Other Equipment" on page 16.
To Do This...
Activate the remote
control to Operate
the HD DVR
Turn on/off the
HD DVR
Tune directly to a
channel
As you navigate through the channels with your remote control for live TV programs, you
will see the "Info Banner." The Info Banner may display the following information if it is
available: channel number, channel logo, channel name, terrestrial channel icon (if applicable),
current time, program title, program duration, recording in progress icon (if applicable) and
Parental Lock icon (if applicable).
Do This...
Slide device switch to DVR
Press POWER
To tune to an analog channel, press 0-9 to select channel.
For digital sub-channels, press 0-9,
For example, to select sub-channel 21.13.
Press 2+1+
+1+3, and then press ENTER.
Connections
, press 0-9 again, and then ENTER.
31