Table of Contents
Advertisement
Copying Your Tapes (Dubbing)
Connection
VCR/ Camcorder (Hi-Fi)
OUT
VIDEO
VIDEO
L
AUDIO
AUDIO1
R
1
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.
To monitor the dubbing, also connect TV as shown.
2
Connect "L" and "R" AUDIO OUT terminals on Playing VCR to "L" and "R" AUDIO IN
terminals on DECK.
In place of Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit's Audio/Video outputs to DECK.
Playing (Source) VCR
1
Insert a pre-recorded tape.
2
3
Press PLAY, then PAUSE
immediately to enter PLAY/PAUSE
mode.
The operation of steps 4 and 5 must be done on the
playing and recording VCRs at the same time.
4
Press PLAY to start dubbing.
Playing VCR starts playback.
5
Press STOP to stop dubbing.
■ ■ ■ ■ ■ To Monitor Dubbing on TV
1 Turn TV on and tune to the Recording
VCR channel (CH 3 or CH 4).
2 If Auto VCR/TV (see p. 34) is set to
"OFF," press VCR/TV on the remote for
VCR mode.
Note
• Dubbing tapes protected with Copy
Guard will result in poor quality
recordings.
Caution:
• Unauthorized exchanging and/or copying of copyrighted recordings may be copyright
infringement.
• Please note that some tapes cannot be dubbed on DECK.
Also, it is not possible to dub DVD/ Video CD/ CD to VHS tapes using DECK.
• When
appears on the screen while a button is being operated, it means that the corresponding
operation is prohibited by DECK or the disc.
AG-VP320-3(VCR)_24-35.p65
DVD/VCR DECK
IN FROM ANT.
OUT IN1
VHF/UHF
L
OUT TO TV
R
Recording (Editing) DECK
Insert a blank tape with record tab.
Press INPUT to set DECK Input mode
to LINE for Video Input.
(See "Selecting the Input Mode" below.)
Press REC, then STILL/PAUSE
immediately to enter REC/PAUSE
mode.
Press STILL/PAUSE to start dubbing.
DECK starts recording.
Press STOP to stop dubbing.
■ ■ ■ ■ ■ Selecting the Input Mode
Method 1:
Method 2:
Press
• LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
35
TV
Front of DECK
VIDEO IN2 L-AUDIO
IN2-R
VHF/
(Audio/Video In Terminals
UHF
on the front of DECK are
available)
Press INPUT repeatedly.
Channel Number ➛ ➛ ➛ ➛ ➛ LINE1 ➛ ➛ ➛ ➛ ➛ LINE2
Press CH
/ .
Display will change as below.
1
2
3
(CABLE)
(TV)
LINE2
LINE1
125
or
69
2005/05/18, 16:11
Press
35
Advertisement
Table of Contents
