Table of Contents
Advertisement
Before Using
Congratulations
on your purchase of one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring you
years of enjoyment. Please fill in the information
below. The serial number is on the tag located
on the back of your DECK.
• Date of Purchase
• Dealer Purchased From
• Dealer Address
• Dealer Phone No.
• Model No.
AG-VP320
• Serial No.
Accessories
Remote Control
EUR7724KF0R
Loading the Batteries
1) Open cover.
2) Insert batteries as
3) Close cover.
Battery replacement caution
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
Record/ Playback Time
Only use tapes with the
Type of Video Cassette
Tape Speed
Setting
T120
SP
2 Hours
(Standard Play)
SLP
6 Hours
(Super Long Play)
4
AG-VP320-1(Initial)_1-17.p65
Head Cleaning
Playing older or damaged tapes may
eventually cause video heads to become
clogged.
Video Head Clog Sensor
During playback, this screen
appears if clogging is
detected.
To remove screen, press
PLAY on the remote or DECK.
• Use "dry" type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
• Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
Batteries 2 "AA"
Cleaning DECK
Use a soft cloth or dusting attachment of a
vacuum cleaner to remove dust from the
ventilation holes on the back sides and bottom of
RF Coaxial Cable
the cabinet.
LSJA0418
Plastic surfaces are easily scratched and can
be marred by alcohol and various solvents.
Avoid excessive use of oil-based furniture
polishes since the materials used in the cabinet
will accumulate more dust. We recommend
using a non-abrasive, antistatic cleaner and
polisher.
Features for a Quality Picture
(VCR)
Digital Auto Picture
Automatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
marked.
optimum picture quality.
Manual Tracking Control
(to reduce picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise.
Press CH (TRACKING)
control or on DECK until the picture clears up.
To return to Auto Tracking, press POWER off,
then on again a few seconds later.
mark in this DECK.
T160
T180
2 Hours
3 Hours
40 Minutes
V-Lock Control (to reduce picture jitter)
8 Hours
9 Hours
In Still mode, CH (TRACKING)
V-Lock control.
4
/
on the remote
/
operate as a
2005/05/18, 16:11
Advertisement
Table of Contents
