Panasonic DMR-E85H DIGA Operating Instructions Manual page 8

1
STEP Connection
Connecting a cable TV box/satellite receiver
You need to subscribe to a cable TV or satellite TV service to enjoy viewing their programming.
Consult your service provider regarding appropriate cable TV box or satellite receiver.
This unit is not compatible with TV Guide On Screen systems broadcast by satellite.
to are indexes for Spanish Quick Reference.
This unit
IR Blaster
Insert the IR Blaster jack into
the G-LINK terminal.
The cable TV box is
controlled by an IR signal
transmitted through the IR
Blaster.
When selecting channels on
this unit, the corresponding
channels on the cable TV
box also change accordingly.
Make sure to use the IR
Blaster (included). Only
use the included IR
Blaster.
For more information on connections (➡ page 7)
Should I use the AUDIO/VIDEO OUT terminal or
the RF OUT terminal?
If your cable TV box/satellite receiver has both AUDIO/VIDEO OUT
terminals and RF OUT terminals, we recommend connecting the
AUDIO/VIDEO OUT terminal with the unit's L3 terminal. Using this
connection provides better picture quality.
The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
Setting the IR Blaster
Place the IR Blaster in front of the signal sensor of the cable TV
box.
Read the cable TV box operating instructions regarding
positioning of the signal sensor.
RQT7305
8
Television
AUDIO IN
S VIDEO IN
VIDEO IN
R L
Audio/video cable
G-LINK R - AUDIO - L VIDEO S-VIDEO
Y
COMPONENT
VIDEO OUT
R - AUDIO - L VIDEO S-VIDEO
(480P/480I)
Use L3 (not L1).
Audio/video cable
Setting the IR Blaster
➡ below
Cable TV box
VHF/UHF
RF IN
(L1)
R - AUDIO - L VIDEO S-VIDEO
P P
B R
OPTICAL
DIGITAL AUDIO OUT
R - AUDIO - L VIDEO S-VIDEO
(L3)
(PCM/BITSTREAM)
Red White Yellow
Connect to either this
unit's RF IN terminal or
L3 terminal.
OUT
Red White Yellow
R L VIDEO
S-VIDEO
AUDIO
Cable TV box/
satellite receiver
If necessary, use the double sided adhesive tape (included) to
secure the IR Blaster to a flat surface.
e.g. Television stand surface
If you peel off the adhesive tape, the
surface may become damaged.
Once you have confirmed the cable TV
box is operating correctly, secure it by
attaching the adhesive tape.
75 coaxial
cable
RF IN
RF OUT
VHF/UHF
75 coaxial cable
S-Video cable
IN
RF
From antenna or
cable TV jack