Setup Wizard - Mac - D-Link mydlink DNR-312L User Manual

Section 2 - Installation
The following instructions show you how to set up the NVR using your
Mac computer.
After you have inserted the CD into your computer, go to the CD drive
directory, and double-click the Mac Utility folder to enter.
Double-click the DNR-312L Setup Wizard file to start the Setup Wizard,
which will guide you through the installation process from connecting
your hardware to configuring your NVR.
Simply click Start to go through the Setup Wizard, which will guide
you through the installation process from connecting your hardware to
configuring your NVR.
Note: The computer used to access the NVR must be on the same
subnet as the NVR. If your network is using a DHCP server, the NVR will
automatically be in the same subnet.
D-Link DNR-312L User Manual

Setup Wizard - Mac

22