Setup; Network; Network Setup - D-Link mydlink DNR-312L User Manual

Section 4 - Configuration
Network Setup lets you configure how you connect the NVR to the internet.
DHCP:
Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be automatically
updated to your NVR.
Static IP: You may obtain a static or fixed IP address and other network
information from your network administrator for your NVR. A static
IP address will simplify access to your NVR in the future.
IP Address: The fixed IP address.
The default value 255.255.255.0 is used to determine if the destination is in the same subnet.
Subnet Mask:
The gateway forwards frames to destinations in a different subnet. Invalid gateway settings may cause the failure of
Gateway IP
transmissions to a different subnet.
Address:
Primary domain name server that translates names to IP addresses.
DNS1:
Secondary domain name server to backup the primary one.
DNS2:
Enable this setting if your ISP (DSL service) is using PPPoE. You may already have a Username and Password provided by
Enable
your ISP, or you may need to contact your ISP. The connection status will be determined automatically by the system.
PPPoE
Enable or disable the DHCP server. If your network doesn't have a DHCP server, enable this feature for easier local network
DHCP server:

setup.

Enable the Bonjour service to allow users to discover the DNR-312L with Apple devices.
Enable Bonjour:
Enter the name of the device that will be used to identify the DNR-312L when using Apple devices.
Bonjour Name:
D-Link DNR-312L User Manual
Setup

Network

Network Setup

45