D-Link mydlink DNR-312L User Manual page 62

Section 4 - Configuration
You can save the NVR configuration to a file and restore it when necessary, such as
restarting the NVR in the event of a crash. Reset the NVR to restore all configurations to
factory default.
System Restart: If the NVR is malfunctioning or crashes unexpectedly, click Restart
on the NVR. Restarting the NVR will take about ninety seconds.
System
Shutdown:
This will shut down the NVR.
Restore to
Factory Default This will reset all settings back to the factory defaults.
Settings:
Save All the configurations can be saved as a file to the specified location. Click Save to save the file.
Configuration
Settings:
Load You can restore the configuration file after resetting to factory default file. Click Browse to select the configuration file and
restore it by clicking Load.
Configuration
Settings:
Idle Time When the adminstrator enters all the Setup pages(except the Live Video and Playback Page), the NVR will keep track of the idle
time when the user is not active. If this inactive period exceeds the specified limit, the user will be logged out and will have to
(Minutes):
log in again for security purposes. You can change the idle time limit here.
Buzzer: Enable or disable the buzzer. This is an audible alarm that sounds off when an event is triggered.
Enable Auto Enable or disable auto plugin. Enabling auto plugin allows the NVR to automatically detect any connected cameras.
Plugin:
Enabling this option will allow the menu to auto-hide when not in use.
Menu Auto
Hide:
Enable Auto Enabling this option will cause the system to automatically log in with the specified user account.
Log in
D-Link DNR-312L User Manual
System
58