Canon 1130 Service Manual page 496

I. SELECTING THE SITE
The site of installation must satisfy the following; if possible, visit the user's before the
delivery of the machine:
1. There must be a power outlet that may be used exclusively for the copier. It must offer the
rated voltage (±10%), and must allow grounding of the copier.
2. The temperature must be between 15º/59º and 30ºC/86ºF, and the humidity must be between
5% and 80%. Avoid an area near a water faucet, water boiler, humidifier, and refrigerator.
3. Avoid areas near a source of fire and areas subject to dust, ammonium gas, and direct
sunshine. As necessary, provide curtains to block out the sun.
4. The level of ozone generated by the machine in operation should not affect the health of
people working around it. However, some may find it unpleasant. Be sure to choose an area
where ventilation is good.
5. The floor must keep the machine level, with all its feet remaining in contact.
COPYRIGHT © 2002 CANON INC.
Humidity
80
70
60
50
40
30
20
10
5
0 10 15
(32) (50) (59)(73.4)
Figure 11-101
CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
23 30 C
Temperature
(86) ( F)
11-1