Toshiba RAV-SM564UTP-E Service Manual page 91

No. Part name
Ceiling panel
4
SVM-13010_051-106.indd 91 SVM-13010_051-106.indd 91
Procedure
1. Detachment
1) Carry out works of item 1 of
of 3 .
2) Remove the flap connector
(CN510, White, 20P) connected to the
control P .C. board and then remove the
lead wire from the clamp.
NOTE :
Unlock the lock of the housing part and
then remove the connector.
3) Loosen the panel fixing 4 screws.
4) Slide the panel fixing brackets
(4 positions) outward.
5) Push the tentative bracket outward and
then remove the ceiling panel.
2. Attachment
1) Insert the tentative brackets (2 positions)
of the ceiling panel into square holes of
the indoor unit and then hook the panel
tentatively.
NOTE :
The ceiling panel has the directional
properties against the indoor unit.
Direct the louver motor wire to the electric
parts box side of the indoor unit.
2) Pass the head of the panel fixing screw
through hole of the panel fixing bracket
and then slide the panel fixing bracket
inward.
3) Tighten in the panel fixing screw to fix the
ceiling panel.
4) Following to work of item 2 of
the adjust corner cap as before.
5) Connect the louver connector
(CN510, White, 20P) as before and then
fix the lead wire with clamp.
6) Following to work of item 2 of 2 , mount
the electric parts box cover and the
suction grille as before.
Clamp
2 and item 1
CN510
Square hole of indoor unit
Panel fixing screw
Tentative bracket
Push in case Push in case Push in case
of removing of removing of remo
, attach
3
Square hole of indoor unit
Inner side Inner side Inner side
Sliding direction Sliding direction Sliding direction
– 91 –
FILE NO. SVM-13010
Remarks
Louver motor wir Louver motor wiring Louv er motor wiring ing
Electric parts box
Louver motor wiring Louver motor wir Louv er motor wiring ing
Ceiling panel
Square hole of indoor unit
ving
Tentative bracket
Panel fixing scre Panel fixing screw anel fixing screw
Panel fixing br Panel fixing bracket anel fixing bracket et
Outer side Outer side Outer side
2/1/13 2:49 PM 2/1/13 2:49 PM