SuperSign Player
SuperSign Player
Regional and Language Options Settings
Regional and Language Options Settings
If you want to change the language, you can use <Regional and Language Options> of Microsoft Windows XP
Embedded, the NC2000's Operating System.
You can change the language as follows:
1
Change EWF to Disable on the SuperSign Player Menu.
2
In Windows, select Start > Setting > Control Panel > Regional and Language Options.
3
Choose the language you want to use as shown in the illustration.
4
Re-install SuperSign Player with the new language.
5
Change EWF to Enable on the SuperSign Player Menu.
6
Reboot the system.
Attention
● SuperSign Manager and SuperSign Player should use the same language.
19