Table of Contents
Advertisement
C> srurr
0 0
VOTR
(±1
END
Ou 6 6
0 0 0 2.9
0 0 0 0
)
NUMBER
BUTTONS
CH.G/0
3S
6(o
0 0 0 0 0
VHS INDEX SEARCH SYSTEM1
DIGITAL TRACKING
OPERATE
o
N
SUPER SIMPLE SYSTEM (3S) FOR TIMER
PROGRAMMING
"SUPER SIMPLE SYSTEM (3S)" is the simplest and most convenient programming method which requires only "once
pressing" for basic 2 hour recording. Moreover, extra steps as changing channel number and tape speed as well as starting
and ending times can be easily done by simple key operation.
This is similar to Normal Timer Programming on pages 25-26, but this is differentiated from it in the simplicity of program-
ming operation.
PREPARATION
• Turn on the TV and VCR.
• Set the TV to your VCR channel.
• Set the VCR to the VCR mode by pressing the VCR/TV
button when the VCR indicator does not appear on the
Multi-function display.
• Make sure that the clock is adjusted to the current time.
START
NEC
REMOTE CONTROL UNIT RB-26
OPERATIO
When you want to program the timer to record a program of the same channel which you are viewing for basic 2 hours.
0
3S Program Mode
0 Timer Stand-by Mode
• Press the 3S button on the remote
control to set the START time.
• END time is automatically set to
finish recording after 2 hours from
start time.
• After 9 seconds, following instruc-
tion will appear on the screen.
3S PROGRAM 1
3S PROGRAM 1
FOR PROGRAM RECORDING
1. INSERT THE CASSETTE
2. TURN VCR OFF
CH
:06
DATE : TODAY
START . 10:00
END
:12:00
8 SECONDS WAIT
CH
:06
DATE : TODAY
START : 10:00
END
:12:00
8 SECONDS WAIT
3S
pRoa 'CANCEL] CANCEL
3S
PROG. 'CANCEL] CANCEL
START +/-
END -/-
START CORRECT
END CORRECT
START +/-
END +/-
START CORRECT
END CORRECT
CH: The
viewing.
CH is automatically set.
channel which you are
• Press the OPERATE button.
The power will be off and TIMER
REC indicator gl will light.
28
Advertisement
Table of Contents
