Table of Contents
Advertisement
Problem
Check
REMOTE CONTROL
Remote control doesn't work.
Do the batteries need replacing?
Make sure that you are using the remote control within
the operational range no more than 30° either side of the
remote sensor and no more than 7m from the VCR.
Make sure there is no obstruction between the remote
control and the VCR.
TIMER
Clock does not work.
Is the unit receiving power?
If the unit has been left for some period of time
without power, it will need to be adjusted again.
GENERAL
Tape won't go in the cassette
compartment.
Operation buttons don't work.
Emergency indicator is blinking.
Some buzz is heard when the VCR
stops operating.
Is there another tape already in the VCR?
Are you loading the tape correctly, i.e., with the window
side up?
The REW/REV button does not work at the very
beginning of a tape and the FF/CUE, PLAY or REC/OTR
button does not work at the end of a tape.
Unplug and replug the power cord to remove
the signal.
If the emergency indicator continues to blink, contact a
service technician.
When the VCR is turned on and a cassette is
loaded, some buzz can be heard in the STOP mode
because motor is operating for stand-by to another
mode. This is not a sign of malfunction. If you turn off the
VCR or if you eject a cassette in the VCR, motor will stop
operating and no sound will be heard.
35
Advertisement
Table of Contents
