Setting The Acp Bacnet Network Address - LG BECON HVAC BACnet PQNFB17C1 Installation & User Manual

20
INSTALLING ACP BACnet

Setting the ACP BACnet network address

After connecting the ACP BACnet to various devices via the cable, the network environment of the
ACP BACnet should be set by driving the ACP BACnet. The following information should be set for
using the ACP BACnet.
• IP address of the ACP BACnet
• Gateway address
• Net mask
Caution
Setting the network environment information
If the above information is not entered, the communication error may be occurred or it may be
impossible to control by the ACP BACnet. So, be careful to correctly input.
Before configuring the ACP BACnet environment
The network environment of the ACP BACnet can be set by the LCD and the buttons at the front side
of the ACP BACnet.
The current ACP BACnet information and the menu are displayed on the LCD, and the menu can
be changed and selected by pressing
buttons.
and
PQNFB17C0
button and Up/Down/Left/Right (▲, ▼, ◄, ►)
PQNFB17C0