LG BECON HVAC BACnet PQNFB17C1 Installation & User Manual page 32

22
INSTALLING ACP BACnet
Entering into the environment setup mode
Press [SET] button of the ACP BACnet to enter into the environment setup mode of the ACP BACnet.
When the [SET] button is pressed for the first time, the menu to set the IP address is displayed as
shown below.
Press up/down(▲, ▼) button to place the arrow on the desired function.
• When you select [Network Info] and press [SET] button, it enters the No. 1 menu in the following
figure.
• In [Network Info] menu, input the network information such as IP address of the ACP BACnet.
• When you select [Contents] and press [SET] button, it enters the No. 2 menu in the following
figure.
• In [Contents] menu, you can set the functions of the ACP BACnet and select language to use.
• When you select [Function] and press [SET] button, it enters the No. 3 menu in the following
figure.
• In [Function] menu, ACP BACnet software service function is supported.
• When you select [Register FD] and press [SET] button, it enters the No. 4 menu in the
following figure.
For more information, please consult with the experts of BMS.
LG BACnet
SW ver. 1.0.0
IP 192.168.001.100
GW 192.168.001.001
>
Contents
Function
Register FD
[ S E ] T
>
Contents
Function
Register FD
[ ]
1
[ Network Info ]
IP 000.000.000.000
GW 000.000.000.000
MS 000.000.000.000
MC 000000:00:00:00
DHCP NO
2
[Contents]
[ S E ] T
Peak/Demand
ACP ID
Fahrenheit
Device ID
Vnet No
[ ]
3
[ Function ]
S/W update
DB back up
DB recover
Data Logging
4
[Register FD]
IP 000.000.000.000
PORT: 00000
TTL : 00000
ON : 0
0
0
0
000000
000000