Connecting To A Tv - LG LGXBR342 Owner's Manual

Connections (Continued)

Connecting to a TV

Make one of the following connections, depending on
the capabilities of your existing equipment.
RF coaxial connection
Connect the RF.OUT jack on the VCR/DVD Recorder to
the antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied (R).
ote
If you use this connection, tune the TV to the VCR/DVD
Recorder's RF output channel (CH 3 or 4).
How to set the VCR/DVD Recorder's RF output
channel
When the VCR/DVD Recorder is turned off, press and
hold CH (v/V) on the front panel for about five
seconds to change the RF output channel (CH 03 or
CH 04). "RF 03" or "RF 04" appears in the display win-
dow.
Audio/Video connection
1 1
Connect the VIDEO OUT jack on the VCR/DVD
Recorder to the video in jack on the TV using the
video cable (V).
2 2
Connect the Left and Right AUDIO OUT jacks from
the VCR/DVD Recorder to the audio left/right in
jacks from the TV using the audio cables (A).
Rear of TV
ANTENNA S-VIDEO VIDEO
INPUT INPUT INPUT
S V
R
Rear of VCR/DVD Recorder
COMPONENT/PROGRESSIVE VIDEO INPUT
AUDIO INPUT
Y
Pr Pb
R
L
A C
S-Video connection
1 1
Connect the S-VIDEO OUT jack on the VCR/DVD
Recorder to the S-Video in jack on the TV using the
S-Video cable (S).
2 2
Connect the Left and Right AUDIO OUT jacks from
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the audio cables (A).
Component Video (Color Stream
1 1
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the VCR/DVD Recorder to
the corresponding in jacks on the TV using an Y Pb
Pr cable (C).
2 2
Connect the Left and Right AUDIO OUT jacks from
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the audio cables (A).
Progressive Scan (ColorStream
If your television is a high-definition or "digital ready"
television, you may take advantage of the VCR/DVD
Recorder's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the VCR/DVD Recorder.
1 1
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the VCR/DVD Recorder to
the corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
2 2
Connect the Left and Right AUDIO OUT jacks from
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the supplied audio cables
(A).
otes
– Set Progressive Scan option to "ON" in the General
menu, see page 20.
– Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
® ) connection
® pro) connection
15