HP 9122D Service Manual page 54

Solution:
1. If the drive is moved or shipped, customers should install a rubber wedge into
the drive above the shipping disc to prevent the shipping disc from ejecting.
The HP pelrt num-ber of the rubber wedge is
9223-0648.
2. Educate custom~rs regarding removing and installing the shipping disc or media
into the drivE- without first depressing the eject button. New products will
contain an instruction sheet explaining the situation. The part number of the
instruction sheet is
09114-90036.
FSI: All
09114:69511
drives shipped from CSR and CSE will have the rubber wedge
and instruction sheet with the driv~. All drives in FSI should have the rub-
ber wedge installed immediately. Any drives received in FSI with the ship-
ping disc ejected should be returned to CSR or CSE. No drive mechanisms
should be shipped without the rubber wedge.
RP
9-23-85
FOR MORE INFORr-IlTION, CALL YOUR LOCAL HP SALES OR SERVICE OFFICE or East (201) 265-5000, Midwe!at (312) 25!5-9800, Soout h
(404) 955-1500,
lJe~t
(213) 97()-7500
0.·
(415) 968-9200 OR WRITE,Hewlett-Packard,1820 Err()arcadero, Palo Alt(), California
IN EUROPE, CALL YOUR LOCAL HP SALES or SERVICE OFFICE OR WRITE, Hewlett-PaCkard S.A.,7,rue du Boi~-du-L"n,P.O. Box.
CH-1217 Meyrin 2-Gene"a,Switzerland. IN JAPAN, YOkogcll"'a-Hewlett-Packard ltd., 1-27-15. '(abe Sa9amlhara CIty.
Klna9.\IIa Prefecture. Japan 229.
1983 Hewlett-Packlrd Company