Table of Contents
Advertisement
To add frames to child windows
You can add frames to child windows to indicate that the signal assigned to a
child window is program or preview output or a component element of program
or preview output (the currently selected input, a key signal, and so on).
Tips
• The factory default frame color settings are as follows.
Child window output
Program output, and components of program output
Preview output, and components of preview output
• When program output and preview output share the same component
elements, the frame color for program output takes priority.
BKDF-902
1
When using the BKDF-901: If the SHIFT button of the DME/SETUP
block is not lit, press it to light it.
When using the BKDF-902: Skip to step 2.
2
Press the MV button.
A settings sub menu of the MV (multi-view output settings) sub menu
appears in the display panel.
3
Press the h or H button in the numeric keypad until one of the following
status sub menus appears, for one of the types of windows to which frames
can be added.
If the sub menu that you want is already displayed, you can skip this step.
Name displayed in sub
menu title display area
MV1 OA Tally
BKDF-901
Description
Among the multi-view child windows displayed
by a BKDF-950 connected to MV1 socket,
display a frame around windows that display the
current On Air program output, or component
elements of that output.
Basic Switcher Settings
Frame color
Red
Green
101
Advertisement
Table of Contents
