Table of Contents
Advertisement
BKDF-902
1
Turn on the POWER switch on the processor unit by pressing the @ of the
switch.
The processor unit is powered on, and the POWER indicator lights in green.
2
Turn on the POWER switch (when using the BKDF-901) or the POWER
switches A and B (when using the BKDF-902) on the rear panel of the
control panel.
The control panel is powered on, and the panel buttons and display panel
light.
The control panel enters boot mode after the power is turned on. Several
minutes are required before the control panel can be operated.
When the control panel exits boot mode, the following information appears
in the display panel.
BKDF-901
Connecting Up the Switcher
59
Advertisement
Table of Contents
