Gpi Input Settings - Sony DFS-900M Operating Instructions Manual

GPI Input Settings

You can use GPI input signals to control the switcher from
other devices. Pins 1 to 6 of the GPI IN connector are for
GPI input. You can assign GPI input signals to these pins
to control the functions listed below.
For more information about the pins of the GPI IN
connector, see "Pin Assignments" (page 211). For more
information about signal connection, see "Example
Connection of GPI Input" (page 214).
• M/E Trn: Execute an M/E transition.
• M/E Cut: Execute an M/E cut transition.
• M/E Mix: Change the M/E transition type to mix.
• M/E Wipe: Change the M/E transition type to wipe.
• M/E DME: Change the M/E transition type to DME
wipe.
• M/E FAM: Change the M/E transition type to full-
additive mix.
• M/E NAM: Change the M/E transition type to non-
additive mix.
• P/P Trn: Execute a PROGRAM/PRESET transition
(only when using the BKDF-902).
• P/P Cut: Execute a PROGRAM/PRESET cut transition
(only when using the BKDF-902).
• P/P Mix: Change the PROGRAM/PRESET transition
type to mix (only when using the BKDF-902).
• P/P Wipe: Change the PROGRAM/PRESET transition
type to wipe (only when using the BKDF-902).
• DSK 1 Cut: Execute a DSK 1 cut transition.
• DSK 1 Mix: Execute a DSK 1 mix transition.
• DSK 2 Cut: Execute a DSK 2 cut transition.
• DSK 2 Mix: Execute a DSK 2 mix transition.
• FTB: Execute a fade to black.
• SEQ Play: Play a sequence.
To change GPI input settings
Use the GPI sub menu.
To display the GPI sub menu
In the External Connections and Power Block, press the
GPI button twice in quick succession.
GPI IN connector
The most recently used sub menu appears in the display
panel.
To switch between sub menus, press the h and H
buttons in the numeric keypad.
To change settings
Adjust the following parameters.
When using the BKDF-901
Knob Parameter Description
F1
F2
When using the BKDF-902
Knob Parameter Description
F1
GPI button
BKDF-901
GPI button
BKDF-902
GPI GPI input pin
number
F GPI input
function
GPI GPI input pin
number
Settings
1 to 16
M/E Trn, M/E Cut, M/E
Mix, M/E Wipe, M/E
DME, M/E FAM, M/E
NAM, DSK1 Cut, DSK1
Mix, DSK2 Cut, DSK2
Mix, FTB, SEQ Play
Settings
1 to 16
163
GPI Input Settings