Toshiba RBC-AMT32E Pocket Quick Reference Manual page 4

VRF Outdoor data for SMMSI equipment
Code
*0 Pd – High Pressure Sensor (MPa)
*1 Ps – Low Pressure Sensor (MPa)
*2 Td1 – Compressor 1 Discharge Temp. (
*3 Td2 – Compressor 2 Discharge Temp. (
*4 Td3 – Compressor 3 Discharge Temp. (
*5 TS – Suction Temp. (
*6 TE1 – Outdoor Coil Temp. (
*7 TE2 – Outdoor Coil Temp. (
*8 TL – Liquid Temp. (
*9 TO – Outdoor Ambient Temp. (
*A PMV 1 + 2 Opening
*B PMV 4 Opening
*C Compressor 1 Current (A)
*D Compressor 2 Current (A)
*E Compressor 3 Current (A)
*F Outdoor Fan Current (A)
For more detailed descriptions please refer to the relevant technical service manual.
Outdoor Data
o
C)
o
C)
o
C)
o
C)
o
C)
Code
#0 Compressor 1 Revolutions (rps)
#1 Compressor 2 Revolutions (rps)
o
C) #2 Compressor 3 Revolutions (rps)
o
C) #3 Outdoor Fan Mode
o
C) #4 Compressor IPDU 1 Heat Sink Temp. (
#5 Compressor IPDU 2 Heat Sink Temp. (
#6 Compressor IPDU 3 Heat Sink Temp. (
#7 Outdoor Fan IPDU Heat Sink Temp. (
#8 Heating / Cooling Recovery Controlled
#9 Pressure release
#A Discharge Temp. Release
#B Follower Unit Release
#F Outdoor Unit Size (HP)
Note. * Would be replaced with 1, 2, 3 or 4 to
obtain data from respective outdoor unit.
# would be replaced with either 5, 6, 7, 8 to
obtain data from outdoor units 1,2,3 or 4
NOTES:
Outdoor Data
o
C)
o
C)
o
C)
o
C)