Relocation of room temperature sensing from return air to remote controller sensor
Press and hold the
TEST, SET & CL Buttons
The Engineering Menu is accessed at item code 10
Use the Temperature
Use the Timer
Buttons to adjust the value from 0000 to 0001
Press SET to acknowledge the change
Press Test to exit the Engineering Menu
The display will go blank and then flash SETTING whilst the system reconfigures
When SETTING stops flashing press ON/OFF Button to restart the operation
Common Configurable Control Options
*Accessed via Toshiba hard wired remote controller RBC-AMT32E and RBC-AMS41E
simultaneously for 4 seconds
Buttons to navigate to item code 32
Automatic restart after power failure
Press and hold the
The Engineering Menu is accessed at item code 10
Use the Temperature
Use the Timer
Press SET to acknowledge the change
Press Test to exit the Engineering Menu
The display will go blank and then flash SETTING whilst the system
reconfigures
When SETTING stops flashing press ON/OFF Button to restart the
operation
TEST, SET & CL Buttons
Buttons to navigate to item 28
Buttons to adjust the value from 0000 to 0001
simultaneously for 4 seconds