Cisco ASR 5000 Series Installation And Administration Manual page 40

▀ Setup of rootdisk Encapsulation and Mirroring
! /usr/sbin/installboot /usr/platform/SUNW,Netra-T5220/lib/fs/ufs/bootblk
/dev/rdsk/c1t1d0s0
! vxeeprom devalias vx-rootmirror /dev/dsk/c1t1d0s0
Important:
vxtaskmonitor.
Step 16 Mirror the additional volumes with the following command:
# vxmirror rootdisk rootmirror
The output should be as follows:
! vxassist -g defaultdg mirror swapvol rootmirror
! vxassist -g defaultdg mirror export rootmirror
Important:
vxtaskmonitor.
Step 17 Eject the DVD from the drive, by typing /usr/sbin/umount /mnt and eject /dev/dsk/c0t0d0s0.
Step 18
When complete, shut down both the nodes, by typing, hastop
/etc/VRTSvcs/conf/config/ to verify the cluster configuration. Next, type hastart on node 1, then
hastatus. On node 2, type hastart. The cluster should then start, and can be monitored in the hastatus window
open on node 1. Refer to /var/VRTSvcs/log/engine_A.log if you get any errors.
▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide
40
This process will take a long time. It can be monitored from another terminal by typing
This process will take a long time. It can be monitored from another terminal by typing
Veritas Cluster Installation and Management
force. Then, type hacf
all verify
OL-22979-03