Cisco ASR 5000 Series Installation And Administration Manual page 61

L-ESS Installation and Configuration
Parameter Description
Add destination for Select this option if you want to add destination to the currently configured source.
current source
Detach destination Select this option if you want to remove destination from the currently configured source.
for current source
Destination Configuration
Destination Select (L)ocal or (R)emote depending on the location of destination.
Location
Destination Type the destination directory path at the destination side where xDR files are to be stored. In
directory cluster mode installation, this path should be shared path.
Create subdirectory
Type (Y)es if you want to create subdirectory with host name under destination base path.
with hostname
Create subdir under
Type (Y)es if you want to create subdirectory under the host name directory if it exists.
hostname dir
Subdirectory name Type the name of the subdirectory being created.
How should files Type (Y)es if file is required in compressed format at the destination side. If you type (Y)es,
be sent to
the file will be compressed (if it is not previously compressed) and then forwarded. If you
destination?
type (N)o, the file will be uncompressed (if previously compressed) and then forwarded to
Compressed/Decom
destination.
pressed
Filter string Type the unique string that is used to identify the xDR files to be included or excluded based
on filter list. If the filter string is provided, L-ESS will pull/push files only with matching
filter string.
For example, the include filter list can be [MIP,OCS] and the exclude filter list can be
![ACR,NBR].
File prefix while Type the file prefix to be used while transferring the xDR files to the destination.
transfer
Miscellaneous Configuration
Start disk clean up To enable the disk cleanup based on the disk utilization threshold level, type (Y)es. This
based on threshold
causes the deletion of older files on disk crossing the threshold of the Disk threshold 2
parameter until disk utilization drops below Disk threshold 1.
Disk threshold 1 Type the first level threshold value, in percentage, for monitoring disk usage. If disk
utilization goes beyond this threshold an alarm is raised indicating that the disk is
overutilized. The value must be an integer from 1 through 100.
Disk threshold 2 Type the second level threshold value, in percentage, for monitoring disk usage. If disk
utilization goes beyond this threshold an alarm is raised indicating that the disk utilization has
crossed the configured second level threshold. This threshold is specifically to notify that
disk is now critically low. The value must be an integer from 1 through 100.
Enable SNMP
Type (Y)es to enable the SNMP trap notifications.
SNMP Version Type the SNMP version of the traps that should be generated by L-ESS. The currently
supported SNMP versions are v1 and v2c.
OL-22979-03
Cisco ASR 5000 Series External Storage Server Installation and Administration Guide ▄
Installing L-ESS Application in Cluster Mode ▀
Default
Value
Null
Null
Local
Null
y
y
data
c
Null
Null
y
80
98
Yes
v1
61