Cisco ASR 5000 Series Installation And Administration Manual page 55

L-ESS Installation and Configuration
Parameter Description
Host Name or IP To establish an SFTP connection, type the hostname or IP address of the chassis.
Address of
Starent Platform
SFTP User Name Type the user name used to log on to chassis.
SFTP Password Type the password used to log on to chassis.
The above mentioned parameters are stored in a database. These parameters can be added, removed or modified through
the config utility, lessConfigUtility.sh, present in the /<less_install_dir>/ess directory. If you would like to change any
of the existing configuration, or set additional parameters, see the L-ESS Server Configuration section in this guide.
After providing the inputs for the parameters, the script extracts the l_ess.tar file and then installs the L-ESS application.
OL-22979-03
Important:
This parameter is applicable only if the source or
destination is at remote location.
Important:
This parameter is applicable only if the source or
destination is at remote location.
Important:
This parameter is applicable only if the source or
destination is at remote location.
Cisco ASR 5000 Series External Storage Server Installation and Administration Guide ▄
Installing L-ESS Application in Stand-alone Mode ▀
Default Value
Null
Null
Null
55