Line Commands
show line
show line
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the line parameters, use the show line Privileged EXEC mode command.
Syntax
show line [console | telnet | ssh]
Parameters
•
console—(Optional) Displays the console configuration.
•
telnet—(Optional) Displays the Telnet configuration.
•
ssh—(Optional) Displays the SSH configuration.
Default Configuration
If the line is not specified, all line configuration parameters are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays all line configuration parameters:
switchxxxxxx# show line
Console ==============================
Baudrate
Session Timeout : 10 (minutes)
History Count
Password Retry
Silent Time
Telnet ===============================
Telnet Server
Session Timeout : 0 (minutes)
History Count
Password Retry
Silent Time
SSH ==================================
SSH Server
Session Timeout : 10 (minutes)
History Count
Password Retry
Silent Time
: 9600
: 128
: 3
: 0 (seconds)
: enabled
: 128
: 3
: 0 (seconds)
: disabled
: 128
: 3
: 0 (seconds)
21
314