RADIUS Commands
show radius-server default-param
show radius-server default-param
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Field
Usage-Type
Key
To show the default RADIUS server parameters, use the show radius-server
default-param Privileged EXEC mode command.
Syntax
show radius-server default-param
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show radius-server default-param
Retries| Timeout|
--------+--------+---------
3
|
3
|
Description
Authentication type of the RADIUS server. The
possible values are:
•
802.1x—The RADIUS server is used for 802.1x
port authentication.
•
all—The RADIUS server is used for user login
authentication and 802.1x port authentication.
•
login—The RADIUS server is used for user login
authentication (authenticating users that want to
administer the switch).
Authentication and encryption key for all RADIUS
communications between the switch and the RADIUS
server.
Key
29
421