Advertisement
Thank you for your purchase of the Sanyo Vacuum Cleaner.
Please read these instructions carefully before using.
A FEW PRECAUTIONS
1. Operating
without
the filter
in place will
allow
dust to enter the
motor and could damage the vacuum cleaner.
2. Keep the vacuum cleaner away from stoves and other heat sources.
Heat can deform and discolor the plastic parts of the unit.
3. Keep
the
vacuum
cleaner
free
of insecticides.
Do not wipe with
benzine, thinner,
petrol or other oils which might cause discoloration
or cracking. To clean the body and hose, dampen a cloth with a mild
detergent and wipe clean.
4. Blocking
the suction inlet or allowing the dust to clog the hose will
decrease the efficiency
of the motor.
5. Be sure not to push the clamp
button
while carrying
the vacuum
cleaner.
6. Never try to vacuum
the following
objects. They
may damage the
unit or cause a fire.
* Wet things, mud, soil, and fluids
* Burning cigarettes
* Needles and razor blades
* Inflammable
materials such as gasoline and thinner
7. The following
kinds of treatment
shorten hose life:
* Bending hose at an acute angle when storing
* Pulling the hose with excessive force
* Placing heavy objects on, or stepping on the hose
8. Pull out the plug from the power source after use. Grasp the plug –
not the cord – when pulling out the plug.
Pulling on the cord may lead to shortcircuiting.
9. Long and continuous
use causes the exhaust air and the body of the
vacuum
cleaner
to become warm.
This,
however,
does not denote
malfunction.
10. When vacuuming places that are very dusty, and also when vacuuming
regularly, empty the dust compartment
before it becomes completely
filled.
Frequent
emptying
lengthens the life of the motor
and maintains
strong suction power.
11. Do not insert fingers into the turbine
brush suction slit while the
cleaner is operating.
The turbine
brush inside revolves at a high speed.
Do not insert fingers while motor
is on. Be especially careful when
children are around.
(SC T9200/T9200EM/T9200EM
K)
12. Do not oil the turbine
brush bearings. Oil can crack the plastic parts
around the bearings. (SC T9200/T9200EM/T9200
EMK)
Advertisement
