Advertisement
NAME AND FUNCTION OF PARTS (Assembleesindicetedin the centerillustration.)
/-
.
Floor Nozzle
The two-way floor nozzle has a lever
with two positions.
FLOOR:
For vacuuming wooden floors,
linoleum or plastic covered
floors.
RUG:
For vacuuming rugs and car-
pets.
(SC 9200E/9200EM/92~EK/9200
EMK)
RUG
*
FLOOR
Lew
(SC 50/51 /30Kl
w
FLOOR
~i7uG
/-
Vecuum PowerAdjustment Ring
\f
Dust Indicator
\
(SC
50/51 /50K/SC
9200EM/9200EMK/T9200E
M/T9200EMK)
The dust indicator shows the amou?nt of dust that has collected
The full vacuum power of the cleaner
in the dust compartment.
Hold the floor nozzle or turbine brush
may k too strong in certain cases, for
/'
Vacuum power
away from the floor, while operating to check.
instance when vacuuming curtains and
I
adjustment ring
draperies. In these cases. turn the
vacuum power adjustment ring [on the
hose) to control the vacuum power.
Match the hole in the ring with the
Vacuuming can
hose hole to reduce the power.
\
Floor Nozzle
_
Turbine Brush
\
(SC
T92001T92C0EWT9200W0
The two-way turbine brush has a lever with two
'iti""s-
'uGmFLOOR
Note: Do not clean bare floors with lever position
"'RUG".
This might damage the floor.
This attachment
for vacuuming rugs has a small
built-in turbine that is driven by the wcti.an
force of the cleaner. The turbine turns a brush
inside so that the attachment can more efficiently
pick up pieces of cotton thread and fine dust
particles on the carpet.
Turbine
-
'r"'h* ,
,-
\
Hendle
There is a recess made undemeetfr the dust
compartment.
which can
be used conveniently for
transportation
or to
make it stand upright.
\
h
f,
0'
Insert the hose all the
way up to the hose
stopper.
To detach it, press
the ho= stopper and
pull the hose toward
you .
(
Switch
)~
Cord RewindButton
\
Press the ON side of the
switch to start the
motor.
To stop the motor, press the
OFF side of the switch.
IRP!!D
To
pull
the cord back into the unit, press the cord
rewind button.
Cord re<ind buttqn
Caution:
'Hold
the plug when
rewinding the cord so that
the plug does not damage
furniture,
hands. the vacuum
cleaner or the cord by hitting
them. Holding the plug will
make rewinding smoother.
/
Attachments
\
crevice-
For vacuuming edges
and gapt.
Round brush
a
For vacuuming
fragile or easily
~scratched
items.
/
/
ElectricCord end Plug '
Pull out the cord and connect
the plug.
Do not extend the cord
from the unit beyond the
red marker line.
BIOWW (Exhaustoutlet)
'
l=
Use blower to blow dust
behind furniture, etc.
1. Insert the hose into the
exhaust outlet.
2. Press the ON side of the
,.-
'
~.
~~~viceattachnm"t
\
Unclogging the Hose
When the hose is clogged with dust, remove it in the following manner:
1) Pull out the angle pipe by turning the removal ring in either direction.
2) uw a .i"yt garden hose to push out the
Angled Pipe -
@
@)
dust clogging the hose.
3) Insert the angle pipe in place and return
the ring to its original position.
P-
Removal ring
Do not me the hose without the angled pipe in
plaCe.
@)@
If the hose is used without
the angled pipe, the
hose will bend excessively, causing it to break.
e+
-.
Advertisement
