Fujitsu ETERNUS DX60 S3 Configuration Manual page 7

Chapter 1 Workflow
Setting the CA Port Groups
Create a group of ports for each CA type.
"2.1.4 Setting the CA Port Groups" (page 10)
•
Setting the FC Host
Register the WWNs of the accessing Fibre Channel cards.
"2.1.5 Registering the WWNs of the Accessing Fibre Channel Cards (Setting FC Host)" (page 10)
•
Setting the Host Affinity
Define the relationship between the FC host, the CA port group, and the LUN group.
• "2.1.6 Allocating LUN Groups (Setting the Host Affinity)" (page 11)
Setting the Specific Parameters
Set the required parameters according to the OS and the connection configuration.
"2.2 Specific Settings" (page 11)
•
Checking the WWNs
Check information that is necessary for connecting to the server.
"2.3 Checking the WWNs" (page 11)
•
After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage
ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for each OS.
7
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
P3AM-7962-08ENZ0