Fujitsu LPF-4800 User Manual page 35

Table of RGB Compatible Frequencies
PC Picture mode
PCAT VGA
PCAT VGA
PCAT VGA
PCAT VGA
PCAT VGA
PCAT SVGA
PCAT SVGA
PCAT SVGA
PCAT SVGA
PCAT SVGA
PCAT XGA
PCAT XGA
PCAT XGA
PCAT XGA
PCAT SXGA
PCAT SXGA
PCAT SXGA
PCAT SXGA
MAC 13-inch
MAC 16-inch
MAC 16-inch
MAC 19-inch
MAC 19-inch
MAC 21-inch
• No image may appear even if the resolution and frequency mentioned above are the same.
• PC display mode
When an image signal is input from a PC, the projector automatically selects the mode (resolution and frequency)
and projectsthe picture according to that mode.
The projector fundamentally conforms to VESA (Video Electronics Standards Association) standards, but depend-
ing on the type of PC, a non-VESA signal may be output. In such cases, the projected image will not be correctly
displayed, the overall picture will be blue in color, and the [NO SIGNAL] message will be displayed on the screen.
In this case, reset the image signal from the PC to another compatible mode. For details, refer to the above table
and the instruction manual for the PC.
Note
• All names of companies and products contained in this manual are trademarks or registered trademarks of the
respective companies.
• VGA is a registered trademark of IBM.
• Macintosh is a registered trademark of Apple Computer Inc.
Picture mode
Horizontal (dot) Vertical (line)
720 400
640 480
640 480
640 480
640 480
800 600
800 600
800 600
800 600
800 600
1024 768
1024 768
1024 768
1024 768
1152 864
1280 960
1280 1024
1280 1024
640 480
832 624
832 624
1024 768
1024 768
1152 870
Frequency
Horizontal (kHz) Vertical (Hz)
31.5 70.0
31.5 59.9
37.5 75.0
37.9 72.8
43.3 85.0
35.2 56.3
37.9 60.3
48.1 72.2
46.9 75.0
53.7 85.0
48.4 60.0
56.5 70.0
60.0 75.0
68.7 85.0
67.5 75.0
60.0 60.0
64.0 60.0
80.0 75.0
35.0 66.7
49.7 74.5
49.1 75.1
60.2 74.9
48.2 59.3
68.7 75.1
En-35